I'd personally advocate for a satellite meter/signal finder and not of the ilk being discussed on jamii but something along the lines of Satlink ws-6918p or ws6979 hd (which incidentally has been discussed in the current and final edition of TELE-audiovision magazine). These satellite meters however do not come cheap, as you may confirm from aliexpress.com

Of importance, you cannot simply change parameters on your decoder and expect to get a signal without moving the dish. You must either move the dish physically or motorize it to correspond to the satellite you wanna receive. That means you must know the parameters of that particular satellite i.e. the azimuth, elevation, lnb skew and whether the 60cm dish size is the appropriate one to nab your satellite of interest. This info is available from a variety of sites such as dishpointer.com, satbeams.com, satstar.net and many others.

As for beIN and the Arabic channels at 7w, nothing much we can about it. That satellite is intended for the Arabic audience, what we receive here if just fringe. It wasn't intended for us as such.

I moved from 4922 to 4950H. I didn't like the tuner in 4922. In 4950H. it's there and even if it weren't, there's always the option to add new satellites and tps.

lets go bird hunting

http://www.jamiiforums.c...ld-and-sat-gear-780.html

Bein has made some changes..Added 12 channels

I am only receiving half of the channels..BeinHD 1 to 10

Do I need to realign my dish or what ?

Hi Caramba. Did you manage to connect to Es'hailsat for Bein Sport? If so, what dish size? I've been using 90cm offset on Nilesat 7W and of course i've lost some channels. Thanks.