@sandu;
Seems you r good in electronics….
@smano;
I got the satellite finder at Spikes Spares & Electronics shop,River Road/Luthuli jxn... at just ksh1000.
In simple terms,to align the dish wire the satellite finder between the dish and the receiver (cable that goes to the decoder),turn on the decoder.
Loosen the adjustment screws..And adjust your satellite dish Left-Right until the meter on the sat finder indicates optimum signal strength then tighten the Left-Right adj screws.
Now adjust your satellite dish top-down until the meter on the sat finder indicates optimum signal strength then tighten the top-down adj screws.
Next adjust the LNB until the meter on the sat finder indicates optimum signal strength
go back to the house and enjoy...
For detailed steps,check this link on how to install and align the dish.
http://satellitetv.digit...r_satellite_install.php
(The sat finder also has a 2-page guide. which works fine)
Since mine was already installed,I just did alignment as indicated in Step 5 of the article.
NB: The installation part talks about finding the correct Elevation and Azimuth so that you know how your dish should be facing initially. To achieve this I suggest you look at the neighbors’ dish and let yours face the same direction….then you can start finding the signal using the sat finder.
Next time am moving in a new house,I expect to do the installation myself…(maybe I will get someone just to drill the wall)
By the way; have you thot of how much money you save if you do such tasks yourself......
I can't wait to service my car next month............
got all the tools ready
Just hang on..........
none